|
|
|
|
Applications |
|
|
AN00156-001
|
Applying a Known Torque
|
|
|
AN00154-000
|
Rotary Cutting at Synchronous Speed
|
|
|
AN00122-002
|
Using flying shears for embossing, rotary knife, sheet feeder and labeling applications
|
|
|
AN00116-002
|
Understanding how flying shears work for synchronized motion
|
|
|
AN00109-003
|
Complete tool changer application, finding the shortest path to the next move. Demonstrates indexing and preset positions.
|
|
|
AN00108-002
|
Virtual axes for line encoder simulation, cascading motion and debugging.
|
|
|
AN00106-002
|
Handling multiple registration marks for cut to length and label feeding
|
|
|
AN00105-003
|
Modifiying final/target position on the fly such as cut to length, registration and press feeder.
|
|
|
AN00103-003
|
Product labeling application whereby final position is modified on the fly. Cut to length with registration control.
|
|
|
AN00102-002
|
Overview of programming NextMove controllers using embedded C tools
|
|
|
AN00100-002
|
Continuous clutch follow for product infeed, product phasing and product registration
|
|
Communications |
|
|
AN00158-000
|
Interfacing RSView with Mint Controllers
|
|
|
AN00147-000
|
This application note describes the keywords available to determine when both the EPL network
and the remote devices are operational.
|
|
|
AN00146-000
|
This application note (and associated example code) details how a
Mint controller can operate as a master on a MC protocol network
(i.e. effectively ‘emulate’ a Mitsubishi PLC)
|
|
|
AN00141-000
|
This application note provides details on how to connect Workbench
v5.5 to a Mint Controller remotely using analog modems.
|
|
|
AN00140-003
|
Interfacing and getting started with WAGO CANopen I/O couplers
|
|
|
AN00133-001
|
DF1 protocol for interfacing to Rockwell equipment over RS232/485
|
|
|
AN00130-003
|
ASCII based Modbus protocol written in Mint
|
|
|
An00129-002
|
Host to controller data communications using Baldor's Host Comms Protocol #2
|
|
|
AN00121-000
|
Profibus option for Series-II. PLC interfacing using Siemens S7-300 PLC in Process Data Mode
|
|
|
AN00119-000
|
Profibus option for Series-II. PLC interfacing using Siemens S7-300 PLC in Command Mode
|
|
|
AN00113-001
|
Using ActiveX controls to download data to a Mint controller.
|
|
|
AN00110-003
|
Communication between a Mint controller and a host computer.
|
|
|
AN00101-002
|
DeviceNet option card for Series-II drives for PLC interfacing using Allen Bradley SLC5/03
|
|
H2 Application Notes |
|
|
AN060019H2
|
Understanding Percent Impedance
|
|
|
AN060018H2
|
Using the Mint WorkBench to program and setup the H2 drives
|
|
|
AN060016H2
|
Using the Ethernet Server Expansion Board on H2. Direct connection from a PC with an Internet card to the H2 drive.
|
|
|
AN060015H2
|
Details setting up 15 preset positions on H2 Vector and Servo.
|
|
|
AN060014H2
|
Programmable Digital Filter for Analog Signal Sources. How to use the software filter to reduce or eliminate the effects of noise on analog reference signals used for speed control, torque control, and process control.
|
|
|
AN060013H2
|
Making use of new H2 S-Curves to provide smooth starts and stops
|
|
|
AN060012H2
|
Remote mounting the H2 keypad. How to disconnect the H2 Keypad and use as an external Keypad
|
|
|
AN060011H2
|
How to Upload & Download Parameters using the H2 Smart Keypad
|
|
|
AN060010H2
|
How to use the Local Torque Mode feature and how it allows the operator to control the torque of a motor while in the Keypad operating mode.
|
|
|
AN060009H2
|
Zero, Last Speed, or Set Speed on Power Up from the Keypad. Describes the three options for applying a speed demand, on power up, while in the local mode.
|
|
|
AN060008H2
|
Discusses connecting a realy to a digital output on the H2 Inverter, Vector and Servo drives can be connected to a relay.
|
|
|
AN060007H2
|
Discusses the relay outputs for the H2 Inverter, Vector and Servo drives.
|
|
|
AN060006H2
|
How To Upload/Download parameters using Mint WorkBench
|
|
|
AN060005H2
|
Setting Profile Run mode for up to 7 different preset speed profiles
|
|
|
AN060004H2
|
Using an external power source for the digital I/O rather than the internal source. Useful for safety critical applications.
|
|
|
AN060003H2
|
Provides detailed instructions on auto-tuning H2 vector controls/drives.
|
|
|
AN060002H2
|
Provides a clear overview of the H2 digital inputs.
|
|
|
AN060001H2
|
Details installation of contactors.
|
|
HMI Panels |
|
|
AN00137-001
|
Storing recipes on a Baldor HMI
|
|
|
AN00134-001
|
Recipe downloads using Baldor's CANopen HMI
|
|
|
AN00131-001
|
How to upgrade firmware on a Baldor HMI
|
|
|
AN00112-004
|
Sample project for Baldor's HMI panels using the serial port.
|
|
|
AN00111-005
|
Sample project for Baldor's CANopen HMI range
|
|
Mint |
|
|
AN00157-000
|
Installing the Mint ActiveX control
|
|
|
AN00135-000
|
Communicating to Mint controllers from VBA (Visual Basic for Applications) using the Mint ActiveX
|
|
|
AN00127-001
|
Getting started with Baldor's Active control and Visual Studio.NET
|
|
|
AN00118-000
|
Understanding trapezoidal moves and S-ramps
|
|
|
AN00117-001
|
Understanding the Mint move buffer for interpolated and synchronized motion
|
|
|
AN00115-001
|
Understanding how trapezoidal moves work for index moves.
|
|
|
AN00114-001
|
Rounded corners for XY applications.
|
|
|
AN00107-002
|
Overview of Mint's multi-tasking capbilities
|
|
|
AN00104-004
|
Recommended practices for coding Mint applications.
|
|
Product Information |
|
|
AN00155-001
|
Converting from NextMove BX II to NextMove ESB-2
|
|
|
AN00153-002
|
Comparison of NextMove ESB and NextMove ESB-2
|
|
|
AN00152-001
|
Using the RoHS compliant NextMove PCI-2
|
|
|
AN00151-001
|
Using the RoHS compliant NextMove ES and its effect on NextMove ST
|
|
|
AN00149-000
|
Comparison of NextMove PCI and NextMove PCI-2
|
|
|
AN00123-003
|
Connecting NextMove ESB to MicroFlex in speed mode
|
