 Baldor's DSMS Series stepper motors follow on from the DSM stepper motors integrating a high torque stepper motor and microstepping drive. New features include:
- Advanced second generation current control for exceptional performance and smoothness
- Quieter operation
- 20 microstep resolutions including degrees, metric and arc minutes
- Wider operating voltage range
- USB programming cable for easy setup
- Operating temperature extended to -40 to 85 degC
This is ideally suited for machine designers who want the simplicity of an integrated solution. The DSM motors helps to reduce the wiring in the system and the potential for problems due to electrical noise.
DSM is available in three frame sizes, NEMA 17, 23 and 34, and in 3 stack lengths. This gives a choice of motor torque values from 22.6 N-cm for the smallest motor to 749 N-cm for the largest motor.
A 1.8° high torque motor is combined with a microstepping drive, with up to 20 resolution settings from 400 steps to 51200 steps per motor revolution. The resolution is set using a simple Windows front end and USB Parameter Setup Cable. Additionally, the front end allows the motor run/hold current and motor direction to be changed. These settings can be changed on the fly via an integrated SPI (Serial Programming Interface) port and are stored in non-volatile memory.
The versatile, compact DSM motors are is available in multiple configurations to fit various system needs. These options include: a single shaft standalone device; dual shaft rotary motor with optical encoder or control knob. Interface connections are accomplished using a plug in connector, or 30 cm (12") flying leads.
The DSM motor is a compact, powerful and inexpensive solution that will reduce system cost, design and assembly time for a large range of stepping motor applications. It is ideally suited for use with Baldor's motion controllers, especially the versatile NextMove e100 motion controller.
|
